Digitalt delefilter med Danta DSM-48DT

Digitalt delefilter med danta

Lagerstatus: På lager - Bestil inden kl.14.00 og vi sender i dag !

Pris: 7.799,00 DKK

Tilbud 6.941,11 DKK

Img stageline

Gratis fragt ved køb over 800 kr, derunder kun 29 kr i fragt

Dag til Dag levering - bestil inden kl 14.00 og vi sender idag !

14 dages fuld returret

Pris Garanti

25 års erfaring og faguddannet rådgivning.

Ring 42 90 50 42 for mere info.

Beskrivelse
Detaljer

Convenient audio management within a network ...
Due to the Dante™ interface, it is possible to conveniently integrate the speaker management system DSM-48DT as a 2-channel receiver into a Dante™ audio network. Both of the Dante™ signals are available for the input channels IN3 and IN4, alternatively to the analogue inputs and the digital input. Thus, the DSM-48DT allows you to receive one stereo audio signal or two mono audio signals from other Dante™-enabled devices which are located in the same subnetwork and to process this/these in the same way as an analogue signal or AES/EBU signal.
Speaker management systems featuring analogue inputs as well as outputs and additionally provide a Dante™ interface are called Breakout Boxes. In order to use the DSM-48DT as a receiver unit, it has to be connected to at least one Fast Ethernet switch (100 Mbps Ethernet).

Digital speaker management system, with Dante™ module.

  • 4 analogue inputs and 8 analogue outputs (XLR, balanced)
  • AES/EBU digital input, stereo
  • 2 Dante™ channels
  • 64-bit DSP, sampling rate: 96 kHz
  • Dynamic range: > 118 dB
  • Latency: 0.64 ms
  • Routing via fader for user-defined routing of the inputs to the outputs
  • Audio transmission over Ethernet via Dante™ protocol
  • Graphical user interface, PC editing software (devices will be identified automatically)
  • 80 user presets can be stored
  • Remote control via USB or TCP/IP LAN
  • Dot matrix display with 2 x 16 characters
  • VU meter with 4 LEDs for each channel, level display and peak
  • 482 mm (19") rack installation, 1 RS

Input (data for each channel)

  • Gain control: -48 dB to +12 dB
  • 10 parametric equalizers with 8 types of filters each
  • 2 crossover networks with Butterworth, Linkwitz-Riley and Bessel filters as well as individually created types of filters from 6 to 24 dB/oct
  • Delay to be switched between time (ms) and distance (m): 2,000 ms max. in steps of 10 µsec or 686 m max. in steps of 3.4 mm
  • Limiter, threshold: from -48 dBu to +24 dBu
  • Compressor, release time: 10 dB/s to 100 dB/s
  • Mute

Output (data for each channel)

  • Gain control: -48 dB to +12 dB
  • 10 parametric equalizers with 8 types of filters each
  • 2 crossover networks with Butterworth, Linkwitz-Riley and Bessel filters as well as individually created types of filters from 6 to 24 dB/oct
  • Delay to be switched between time (ms) and distance (m): 2,000 ms max. in steps of 10 µsec or 686 m max. in steps of 3.4 mm
  • Limiter, threshold: from -48 dBu to +24 dBu
  • Compressor, release time: 10 dB/s to 100 dB/s
  • Mute
  • Routing mix for level adjustments via routing fader
  • Selectable phase (invert, 180°)
TEKNISKE DATA:
Type digital speaker management system
Frequency range 10-40,000 Hz
Control range -
Control frequencies -
Input signal 11 V max.
Input sensitivity -
Input impedance -
Output signal 4 V max.
Output impedance -
Gain -
Phantom power -
Compression -
Gate ratio -
Crossover frequency -
High-pass filter -
Low cut -
Transmission ratio -
S/N ratio > 110 dB
Channel separation -
THD < 0.005%
Admiss. ambient temp. 0-40 °C
Power supply ˜ 230 V/50 Hz/15 VA
Dimensions 482 x 44 x 185 mm, 1 RS
Weight 2.3 kg
Inputs 4 x XLR, bal.
1 x AES/EBU, stereo
1 x RJ45 (LAN)
Outputs 8 x XLR, bal.
Other features USB, LAN

Højttaler og lydudstyr

Vi elsker tilfredse kunder - Håber du bliver den næste...