TF-0410MR Celestion 4" mellemtone

Flere visninger

TF-0410MR Celestion 4" mellemtone
339,00 DKK

Lagerstatus: På lager - Bestil inden kl.14.00 og vi sender i dag !

4" mellemtone


90dB følsomhed


50W RMS


8 ohm


400 - 5000Hz


Hulstørrelse ø93mm


Membran kevlar forstærket pap

Vores webshop er e-mærket – naturligvis!
Køberbeskyttelse på kr. 10.000,-
En nem og gennemskuelig handel
Løbende kontrolleret

 

 

Beskrivelse

Detaljer

TF-0410MR er en 4" mellemtone fra Engelske Celestion hvis membran er lavet i pap blandet med kevlar, som resultere i musikalitet samt fin stabilitet.

Den er closed back som betyder at chassiet er lukket, det gør den let at lave et projekt med da den ikke skal havde sit eget kabinet, men kan fint dele rum med basenheden uden problemer.

PA midrange speaker, 30 W, 8 Ω

  • 10 cm (4") compact PA midrange speaker with closed sheet steel basket
  • Easy installation, no extra cabinet volume required
  • High-quality Kevlar fibre reinforced cellulose cone
  • High efficiency, extended frequency response
  • Heat-resistant 25 mm (1") voice coil on a Kapton voice coil former
  • With impedance linearisation, can be used from approx. 500 Hz on, otherwise 800-4,000 Hz
  • Ideally suited for multi-way PA speaker systems

TEKNISKE DATA:

Impedance (Z) 8 Ω
Operating voltage -
Frequency range 400-5,000 Hz
Resonant frequency (fs) 400 Hz
Rec. crossov. frequ. (fmax.) (12 dB/oct.) -
Power rating 50 WRMS
Peak music power output 100 WMAX
Sensitivity 90 dB
Max. rated SPL -
Max. voltage -
Radiation angle, horizontal
Radiation angle, vertical
Suspension compl. (Cms) closed
Moving mass (Mms) closed
Mech. Q factor (Qms) closed
Electr. Q factor (Qes) closed
Total Q factor (Qts) closed
Equivalent volume (Vas) closed
DC resistance (Re) 5.65 Ω
Force factor (BxL) closed
Voice coil induct. (Le) 0.4 mH
Voice coil diameter Ø 25 mm
Voice coil former Kapton
Linear excursion (XMAX) ±1 mm
Eff. cone area (Sd) 58 cm2
Magnet weight 480 g
Magnet diameter Ø 84 mm
Mounting cutout -
Mounting depth -
Mounting hole diameter -
Hole spacing X-axis -
Hole spacing Y-axis -
Dimensions 108.5 x 108.5 x 60 mm
Outside diameter -
Width -
Height -
Depth -
Protective class
Admiss. ambient temp. 0-40 °C
Weight 1.2 kg