-
Earthquake Earthquake SUB-8: Kompakt 8" Subwoofer 300W 8Ohm til Indbygning
SUB-8 er en subwoofer fra Earthquake med kun 92mm dybde Denne subwoofer til indbygningslyd vedholde det samme udseende som en almindelig 8" indbygningshøjttaler som VQ8, ECS-8.0 eller SPE-82HQ Men kun 92mm i dybden giver den mulighed for at få noget dyb i loftet til trods for at pladsen er trang. Det er opnået ved at konstruktionen har selve motorsystemet bygget på forsiden af enden. Den har indbygget delefilter så den kan fødes med et fullrange forstærker signal, hvor et scenarie kunne være at forbinde på samme forstærker udgang sammen med en af de overstående højttalere og dermed ialt ha en 4 ohms belastning. Har du allerede 2 indbygnings højttalere på 8 ohm hver på en forstærker udgang er det højest sandsynligt for stor en belastning med at koble denne her til oven i dem da det vil give for lav impedans. Med ekstra lang slaglængde for den bevæget noget mere luft end en almindelig indbygningshøjttaler Det er en hjælp til bedre performance med en kasse bag den på ca 25 liter og der er en tegning i billederne. Til denne type enhed anbefaler vi en halv pakke MDM-2 dæmpeuld i kassen, og hvor det er trukket ud så det er løst som candyfloss.
1.290,00 kr
-
Earthquake R8-SWS adapter ringe til BMW
R8-SWS Installation Ring Adapter EarthquakeSound is proud to introduce the R8-SWS adapter set to ease the upgrade of the BMW factory speakers to Earthquake SWS Speakers. Suitable for use with SWS-8X and SWS-8Xi
189,00 kr
-
Earthquake Earthquake Cinénova Grande BR: 1500W Multi-kanals HIFI Forstærker
The Legend reborn. The latest iteration of the legendary Cinénova Grande amplifier is a true tale of evolution. Since its inception the Cinenova Grande reference platform has been the benchmark for new technology. New innovations are constantly put up against the reference design. Astonishingly few circuitry innovations become the genesis of true audio evolution. It is our sincere belief that the new generation represents a meaningful improvement. During the research process for the Cinenova 7, the Grandes smaller sibling, three core technologies were developed. All designed to optimize the amplifiers performance and sound quality. These new technologies proved so successful that with them the Cinénova Grande reference design itself has been reborn.The Cinénova Grande has long been the most powerful multi channel amplifier on the market. The new channel-bridge feature further propels the Cinénova Grande into the wattage stratosphere. Breaking the vaunted 1,500 watts at 8 ohm HIFI amplifier barrier. A feat previously accomplished by only a handful of exotic 2 channel high-end amplifiers.Like its predecessors the Grande BR is a tempered blend of traditional high-end virtues combined with innovative and novel circuitry design. Produced using in-house proprietary manufacturing techniques. Operating in an enhanced class AB state gives it industry leading efficiency making the Cinénova Grande BR a true green amplifier.A brief introduction to the three core technologies new to the Cinenova Grande.The MARS technology (Magnetically Actuated Reanimation System) is a new type of protection system that enables the use of all the amplifier’s power resources without compromising the survivability of the amplifier under catastrophic conditions. Typical protection systems rely on fuses or relays that complicate the signal path thus degrading audio quality. MARS is different as it is not in the signal path, but works by sensing the electro-magnetic signature of the speaker output wire then translating this input into amperes flowing through the wire. Using the principle discovered by Danish Scientist H.C. Oersted, this design has no impact on the sound quality of the amplifier as it is totally separate from the audio circuits. The internal communication of MARS is handled via optics rather than electrical circuits. This means MARS does not create an electromagnetic field as no current is flowing through wires. The signal path remains free of artifacts that impact and taint the sound in other designs as no amount of light activity can influence an electrical system.Normally a relatively large safety margin is necessary because of the antiquated nature of traditional protection systems. MARS operates at 500khz speed making it deadly accurate. This enables the amplifier to utilize the outputs SOA (safe operating area) to the limit. This gives a MARS enabled amplifier 20 percent more power than an identical non-MARS amplifier. During testing the MARS technology showed that the output of the amplifier could be short-circuited at full power more than a thousand times with no damage to the amplifier. MARS does not use any relays or other damping-factor reducing mechanical switches that can wear out or fail over time. Instead, a specially designed circuit instantly shuts off the output drive.In the event a short-circuit activates the MARS protection system, it continuously re-scans the output every 10 seconds. Normal operation automatically resumes as soon as the short-circuit condition is removed. The ION technology (In-Circuit Optimization Network) is an advanced network of connection points on the Cinénova Grande BR circuit-boards. Traditionally, transistors and capacitors are paired, grouped and tested to ensure compatibility. However, it has been shown especially by exotic and esoteric audiophiles across the globe that even highly refined mass produced amplifiers have substantial room for improvement when individually tweaked and optimized. A lot happens when individual components are put together in a circuit. A certain margin of difference between two seemingly identical circuits exists. Some engineers refer to this as the “Ghost in the machine.” The option of being able to fine-tune and optimize a circuit even after it has been built would be the evolutionary solution - enter the ION technology. ION enables individual tweaking while remaining in a mass production environment.When the circuit is completed, the ION network is connected to a specially designed diagnostics computer that automatically determines the optimal connections and ION then makes those connections permanent. The ConCurrent power supply design ensures full power can be delivered at all times to all channels simultaneously. Earthquake engineers developed the parallel symmetric transformer with identical electromagnetic coupling for each secondary winding. Every channel has its own secondary winding, capacitor bank, rectifiers and output circuitry all mounted on massive, individually, vertically-ripped extruded aluminum heat-sinks. The individual channels remain sovereign and autonomous as sharing is not required. This guarantees that no matter how hard one channel is driven it will have no effect on surrounding channels. Power supply efficiency, stiffness and strength are dependent on several factors. The ConCurrent design is the culmination of intense optimization of all known parameters. To stiffen the supply (lower regulation factor) the transformer cores are made of ferrite instead of a lower grade iron material. The windings are made with the same oxygen free copper that is used in high-end speaker cables. To ensure hum-free operation, the transformer is hard-wound and made with military grade high temperature lacquer. The ConCurrent power supply in the Cinénova Grande BR has a transformer rating of 4000VA. From the loudest crescendo to the finest syllable, the Cinénova Grande BR will remain composed and in control. We invite you to enjoy the unique ownership experience of this Cinénova amplifier that was designed by a brilliant mind and built with loving hands. Pris er pr. stk. Specifications: Model nr.: CinenovaGrande EAN: 1450 watts into 1 ohm. RMS 1000 watts into 2 ohm, RMS 660 watts into 4 ohm, RMS 330 watts into 8-ohm, RMS 1500 watts bridge-link into 8 ohm RMS 2500 watts bridge-link into 4 ohm RMS 2800 watts bridge-link into 2 ohm RMS XLR and RCA inputs Frequency Range: 1W + /-0.1dB: 20Hz to 20kHz Signal-to-noise ratio: 122dB at 1kHz-121dB at 5kHz / 120dB at 10kHz Input impedance: 27,000 ohms. 4000VA ferrite OFC low regulation transformer with separate secondary windings. Damping Factor: 1.600 Cinénova Grande BR exceed effortlessly technical standards set by THX, DTS and Dolby Laboratories. Channel Separation: at least 120 dB. Max. Input voltage: 1.9 volts. THD: 1kHz, 8 ohms: 0.001% 12v trigger ( can be switched automatically from your preamplifier or other components with 12v trigger output). Built-in Crossover: selectable between high-pass and low-pass or disengaged. 20Hz - 5kHz infinitely variable. The crossover allows you to determine how much bandwidth your speakers to reproduce. Use the amplifier to bi-amping two channels can be made to reproduce bass / midrange frequencies and two channels for the treble and the last channel might. drive a large passive subwoofer. All this without using any crossovers. Oversized, gold plated 7-way output terminals. Weight: 61,5 kg. Carrying handle on the front panel. Proper lifting technique is recommended. Handmade in the USA. Available in black Dimensions: Handle: Width: 18 mm Depth: 49 mm Chassis: Width: 442 mm Depth: 483 mm Depth with front plate: 494 mm Total lenght w/ handles: 543 mm Front plate Width: 448 mm Height: 221 mm Height with feet: 238 mm Protection Circuit: The transformer has a built-in thermal protection. FFI (Fused Fault Indicators). Diode indicators on the amplifier rear indicates whether a parameter has been exceeded. Each module block is thermally protected. The amplifier is protected against forwarding bad DC to the speaker. The amplifier is protected against short circuit, transistor burning and internal errors. The amplifier is equipped with a 25 amp main fuse (supports your electrical installation larger effect, fuse switch to a major). Each module block is equipped with a 15 amp main fuse pop. Each module block is equipped with two. 10 amp fuses. One for + and one for -. Two diodes back of each modular block monitors whether a fuse is blown. Transistor burning. Connection Dropouts and internal fault (open circuit) Power transient (prevents the amplifier from making loud noise in the loudspeaker at boot). EZXS technology means that each module block individual can be taken out of service. Should it ever need service. Cinénova Grande is hand built in the USA and undergoes a 24-hour test and burn-in process before it is measured and approved for sale. Each amplifier is supplied with its own individual data sheet, where the amplifier's exact measurements are applied, and the name of the technician who performed the measurements. This is proof of performance and ensures that the amplifier lives up to our promise of guaranteed excellence.
47.900,00 kr
-
Earthquake BT5.3NC Trådløs betjening med Bluetooth til dit B&O anlæg og alle andre musikanlæg
Earthquake BT5.3NC: Din Kompakte universelle Lydløsning Oplev den ultimative fleksibilitet i trådløs lyd med Earthquake BT5.3NC Bluetooth®-lydadapteren. Uovertruffen Lydkvalitet: Nyd hi-fi-stereolyd med minimal forvrængning og exceptionelt lav latenstid. Bluetooth® 5.3-teknologien sikrer en stabil, energieffektiv forbindelse, der leverer krystalklar lyd, præcis som kunstneren havde tænkt sig det. Dobbelt Funktionalitet: Skift ubesværet mellem at streame musik trådløst fra din telefon til B&O lydsystemer og andre lydsystemer eller sende lyd fra en ikke-Bluetooth-enhed (f.eks. et tv eller en computer) til dine trådløse hovedtelefoner (sender-tilstand). BT5.3NC er også: Denne alsidige enhed fungerer både som en kraftfuld sender (transmitter) og en intelligent modtager (receiver), designet til at transformere enhver lydopsætning – fra dit faste hi-fi-system derhjemme til bærbare enheder på farten.
235,00 kr
-
Earthquake Cinenova-12 multirumsforstærker
Cinénova 12: Multirumslyd med power til dit hjem Cinénova 12-forstærkeren er en multi-kanal forstærker, der er designet til at levere fremragende lydkvalitet og fleksibilitet til multirumslydsystemer. 12 kanaler med stor fleksibilitet, hvor hver kanal kan laves til en enkelt mono kanal såvel som en subwoofer kanal, og med mulighed for at brokoble 2 kanaler til enten en stereo løsning eller ekstra meget power igennem en brokobling, hvilket gør den ideel til både hjem og endda kommercielle installationer, hvor flere rum skal dækkes af et enkelt lydsystem. Fleksibilitet og Tilpasning til Multirumslyd Cinénova 12 gør det muligt at distribuere lyd til op til seks separate stereozoner, hvilket betyder, at hvert rum eller område kan have sin egen lydstyrke og opsætning. Hver zone har et dedikeret lavpas-delefilter, så både passive og aktive subwoofere kan tilsluttes og tilpasses. Dette giver brugeren fuld kontrol over lydgengivelsen i hvert rum, og det gør Cinénova 12 til en alsidig løsning for mange forskellige lydmiljøer. Klart og Kraftigt Lydoutput Denne forstærker leverer 120W RMS per kanal ved 4 ohm og kan også brokobles til at give 250W RMS ved 8 ohm, hvilket sikrer kraftigt og klart lydoutput, der kan dække store områder med højkvalitetslyd. Med et signal-til-støjforhold på 110 dB og total harmonisk forvrængning (THD) under 0,003 % ved 1 kHz, leverer Cinénova 12 ren og præcis lyd, selv ved høje lydstyrker. Designet til Langvarig Ydelse Med et elegant og moderne udseende er Cinénova 12 en stilfuld tilføjelse til ethvert rum. Den er konstrueret med et robust stålchassis og en børstet aluminiumsfront, der kombinerer holdbarhed og æstetik. Brugervenlig og Smart Integration Cinénova 12 er nem at integrere i dit lydsystem takket være dens brugervenlige grænseflade og tre forskellige tænd/sluk-tilstande (Auto, On og Trigger). Den har LED-indikatorer, der viser status for strøm og drift, hvilket gør fejlfinding enkel. Forstærkeren kan også tilsluttes andre enheder gennem trigger-indgangen og udgangen, hvilket gør den kompatibel med automatiserede systemer. Ideel til Distribuerede Lydsystemer Forstærkerens mange tilslutningsmuligheder, som inkluderer både BUS og LINE RCA, gør det nemt at forbinde den til andre komponenter i et distribueret lydsystem. Cinénova 12 er også udstyret med USB-porte, som kan forsyne strøm til eksterne enheder som f.eks. Bluetooth-adaptere, hvilket øger dens anvendelighed i moderne, trådløse opsætninger. Tekniske Specifikationer Kanaler: 12 kanaler / 6 stereozoner Udgangseffekt: 120W RMS x 12 (4 ohm), 250W RMS x 6 (8 ohm, brokoblet) Crossover Frekvens: 40Hz–140Hz (justerbar pr. zone) Indgangstyper: 3.5mm mini-jack, BUS RCA, LINE RCA Signal-til-Støjforhold: 110 dB Strømforbrug (standby): 0,4W Materialer: Stål chassis, børstet aluminium front Dimensioner: 105 x 486 x 347 mm Vægt: 15 kg Cinénova 12-forstærkeren tilbyder en omfattende løsning til multirumslydsystemer med avanceret teknologi, høj ydeevne og fleksible tilpasningsmuligheder. Den er et ideelt valg for dem, der ønsker at skabe en skræddersyet lydoplevelse, der kan nydes i hele hjemmet eller kontoret.
9.860,00 kr
-
Earthquake Earthquake Bas 10" god til festivalsanlæg EQ-10-8
Er du på udkig efter en kraftfuld og kompakt basdriver til din lydopsætning? Look no further end Earthquake EQ line of Maximum Musical Output drivers. Med et kabinet på kun 31 liter kan denne enkelt driver levere 112dB i gennemsnitlig lydtryk og peak op til 115dB. Earthquake EQ linjen er også unik, da de har en relativt høj resonans og meget lav Qts værdier, hvilket gør det muligt at montere dem i små kabinetter, mens man stadig opretholder en glat, peak-free respons.
550,00 kr
-
Earthquake Earthquake MiniMe DSP P15 Subwoofer: Dyb Bas & DSP Kontrol
Earthquake MiniMe DSP P15 Subwoofer Earthquake MiniMe DSP P15 Subwooferen er virkelig jordskælvet fra MiniMe-serie af subwoofere med en 15" med 40mm slaglængde og gengivelse ned til 18Hz. Den nye MiniMe DSP-forstærker bruger Earthquake's avancerede klasse "D" kredsløb med over 90% effektivitet og tilføjer desuden fordelene ved DSP-kontrol gennem mobile enheder. Det er nu muligt at justere rummet professionelt med en mobilapp, så man kan tilpasse denne MiniMe præcist til rummet, den er placeret i. Gennem en automatiseret rumkorrektionsproces, som iWoofer™ Pro-appen (kun Iphone) tilbyder, får man en tilpasset ydeevne, man fortjener, og opnår det maksimale SPL og en mere lineær respons til ens hjemmebiograf. Der er også op til 48 dB/oktav crossover tilgængelig i appen for en stejl frekvenskutoff. iWoofer-appen er kun tilgængelig for iPhones (iOS). MiniMe DSP ville ikke være komplet uden vores patenterede og berømte SLAPS passive radiator-teknologi. Det øger subwooferens effektivitet og evne til at reproducere subharmoniske frekvenser og høje SPL, man kan mærke. Det unikke design af SLAPS passive radiator bruger dual identiske suspensioner og en specificeret masse, der gør det muligt at bevæge den samme mængde luft i begge retninger. Når den kombineres med en premium aktiv driver, gør SLAPS det muligt for subwooferen at levere mere bas ved subharmoniske niveauer, mens den reducerer belastningen på forstærkeren. MiniMe DSP lyder ikke kun fantastisk, men den har også et imponerende udseende med sit fine finish i dyb multi-lagret sort klaverlakeret og højglans klar lak. Når det kommer til elegance og ydeevne, har MiniMe DSP sat standarden og vil levere alvorlig bas til ens nydelse. For at optimere lyd og klarhed på en subwoofer skal den stemmes korrekt til sit miljø. Gennem en automatiseret rumkorrektion, som iWoofer™ Pro-appen tilbyder, får du den tilpassede ydeevne, du fortjener, og opnår det maksimale SPL og en mere lineær respons til dit hjemmebiograf. Der er også op til 48dB/oktav crossover tilgængelig i applikationen for en stejl frekvensafskæring. MiniMe DSP ville ikke være komplet uden Earthquakes patenterede og berygtede SLAPS passive radiator-teknologi. SLAPS øger dramatisk subwooferens effektivitet og evne til reproduktion af subharmoniske frekvenser og høje SPL, der kan mærkes uden at øge kabinettets volumen. Den unikke design af SLAPS passive radiator bruger dual identiske suspensioner og en specificeret masse, der tillader, at den bevæger den samme mængde luft i begge retninger. Når den kombineres med en MAGMA-X premium langtrækkende aktiv driver, gør SLAPS det muligt for subwooferen at levere mere bas ved subharmoniske niveauer og samtidig reducere belastningen på forstærkeren. Opnå dominerende LFE med SLAPS-teknologi og absolut ingen portstøj. MiniMe DSP lyder ikke kun fantastisk, men den har også et imponerende udseende med sin fint finish i dyb multi-lagret sort klaverlak og højglans klar lak. Når det kommer til elegance og ydeevne, har MiniMe DSP 15 sat standarden og vil levere bas, der ryster hele rummet, til din hjemmebiografnydelse.
15.200,00 kr
-
Earthquake Granite-52 Rockhøjttalere til Udendørs Brug | Vejrbestandige & UV-Sikre
Granite-52 Udendørs højttalersæt - en del af den nye ROCK-on udendørs højttalerserie Specifikt designet til at efterligne et sten udseende og nemt blende ind i ethvert udendørs miljø. Lavet med UV-behandlet, vejrbestandigt kabinetmateriale og holdbar epoxy konstruktion, kan ROCK-on højttalerne modstå de krævende udendørs elementer. Granite-52 er et par rockhøjttalere med en 5 ¼ tommer woofer og en ½ tommer diskant. De fungerer som dine venstre og højre højttalere og har en utrolig frekvensrespons, der er uovertruffen af nogen anden rockhøjttaler. De producerer en ren, præcis lyd. Specifikationer Farver Granite rock Enclosure 15mm Epoxy resin Frequency Response 50Hz-21kHz Midrange/bass Two 5 1/4” Low mass polycone with butyl rubber surround Nominal Impedance 4 ohm RMS Power 40-200W Sensitivity 93 dB Tweeter ½” (13mm) Mylar Voice Coil Dual Voice Coil Diameter 2″ / 50.8 mm Woofer Size 5.25″ Produkt Dimensioner Height 216 mm Width 216 mm Depth 229 mm
1.634,00 kr
-
Earthquake Earthquake Granite-10 Stenlook Udendørs Subwoofer 10" - Kraftfuld Bas
Den mest kraftfulde 10″ Rock Subwoofer på markedet Granite-10 udendørs subwoofer er fra Earthquakes ROCK-ON højttalerserie. Den er specifikt designet til at efterligne et stenlignende udseende, der nemt kan blende ind i ethvert udendørs miljø. Kabinettet til Granite-10 er lavet af en yderst holdbar epoxy-konstruktion og andre UV-behandlede materialer, hvilket gør denne subwoofer til det ideelle valg for de mest krævende udendørs elementer. ROCK-ON Granite-10 Subwooferen har et veldesignet delefilter, der reducerer forvrængninger og producerer ren lyd, der passer ind i naturen. ROCK-ON Granite-10 bringer ægte bas til dit udendørs område, hvilket er noget, der i høj grad er brug for på dagens rockhøjttalermarked. Granite-10 er portet med en "S"-form, der også hjælper med at forhindre, at vand og fugtighed bliver fanget inde i strukturen. Earthquake ROCK-ON Granite-10 Udendørs Subwoofer er et godt valg til at tilføje bas til ethvert nyt eller allerede eksisterende udendørs lydsystem. Kabinettet kan også males, så det matcher eller komplementerer din have, poolområde, forhave, baghave, osv. Med Earthquake Granite-10 vil du omdanne ethvert udendørs område til et underholdningscenter. De vil revitalisere dit udendørs levested, når du tilbringer mere tid udenfor i de varmere måneder. Specifikationer Enclosure Paintable Epoxy Resin Cone Material Polypropylene Frequency Response 30Hz-100Hz Nominal Impedance 4 ohm Power Handling 20-400 Watts Sensitivity 92 dB Voice Coil Single Voice Coil Diameter 2.5″ / 63.5 mm Woofer Size 10″
3.840,00 kr
-
Earthquake Earthquake TNT 693X 3-Vejs Højttalersæt - Kraftfuld Bas, 600W
TNT seriens 6x9" Earthquakesound's TNT 6x9 3-way coaxial forener kraft og alsidighed. Denne højtaler kan nemt erstatte fabriksmonterede højtalere, mens den stadig lyder helt skarp og klar. Med dyb basgengivelse, eliminerer næsten behovet for en subwoofer. TNT 6x9 har ingen fancy detaljer eller udseende; bare ren, rå kraft, som alle kan værdsætte. Det er det bilhøjttaler sæt vi anbefaler til et simpelt festvialsanlæg Weight 4.4 kg Specifikationer Frequency Response 20Hz – 22kHz (±3dB) MAX Power 600W bass 229mm / 25.4mm voice coil Midrange 66mm Nominal Impedance 4 ohm Sensitivity 90dB @1W/1M Tweeter 30mm Mylar dome Produkt Dimensioner Height 95 mm Diameter 152mm x 229mm Cutout Diameter 151mm x 220mm Mounting Depth 86 mm
599,00 kr
-
Earthquake Earthquake PowerHouse Shredder 8000.1 Klasse D Bilstereo Forstærker
PowerHouse Shredder 8000.1 Earthquake Sound præsenterer den mest kraftfulde model i deres PowerHouse Shredder-serie, skabt til dem, der søger ultimativ ydeevne og kontrol i deres lydsystemer. Denne enkeltkanals digitale klasse D-forstærker er designet til at levere enestående effekt og effektivitet og er perfekt til dem, der ønsker at skubbe grænserne for deres lydsystemer. Denne top-of-the-line forstærker fra Shredder-serien inkluderer følgende tekniske specifikationer: Kanaler: 1 Klasse: Digital klasse D Effektudgang ved 1Ω: 9000 WRMS ved 1% THD Effektudgang ved 2Ω: 6000 WRMS ved 1% THD Effektudgang ved 4Ω: 3300 WRMS ved 1% THD Frekvensrespons: 15Hz-20kHz Højpasfilter: 15Hz-80Hz Lavpasfilter: 80Hz-20kHz Basforstærkningsområde: 35Hz-70Hz Basforstærkningsniveau: 0-12dB Signal-støjforhold: 90dB Gain Min/Max: 5V-0,2V Effektivitet: 99% Udgangsstøj: 16mV Denne imponerende forstærker er udstyret med en række funktioner, herunder RCA-input og -output, justerbart crossover-filter, gain-kontrol, basforstærkning og en fjernbetjening til justering af basniveauet. Den er designet til at levere både kraft og præcision, så du kan nyde din musik i enestående kvalitet. Med Earthquake Sound's PowerHouse Shredder-serie får du den ultimative ydeevne og kontrol, du har brug for, når det gælder lydsystemer i højeste kvalitet. Gør dig klar til at opleve lyd på et helt nyt niveau med denne top-of-the-line forstærker.
6.100,00 kr
-
Earthquake Earthquake Sound PHS5000.2 - Kraftfuld Bilstereo Forstærker
PowerHouse Shredder 5000.1 Earthquake Sound introducerer en endnu mere kraftfuld model i deres PowerHouse Shredder-serie, der er designet til at imødekomme behovene hos de mest krævende audioentusiaster og baselskere. Denne enkeltkanals digitale klasse D-forstærker giver dig massiv ydelse og er i stand til at drive de mest kraftfulde højttalere med en utrolig effektivitet på 99% og en frekvensrespons fra 15Hz til 20kHz. Denne imponerende forstærker fra Shredder-serien tilbyder følgende tekniske specifikationer: Kanaler: 1 Klasse: Digital klasse D Effektudgang ved 1Ω: 5000 WRMS ved 1% THD Effektudgang ved 2Ω: 3500 WRMS ved 1% THD Effektudgang ved 4Ω: 1600 WRMS ved 1% THD Frekvensrespons: 15Hz-20kHz Højpasfilter: 15Hz-80Hz Lavpasfilter: 80Hz-20kHz Basforstærkningsområde: 35Hz-70Hz Basforstærkningsniveau: 0-12dB Signal-støjforhold: 90dB Gain Min/Max: 5V-0,2V Effektivitet: 99% Udgangsstøj: 16mV Forstærkeren er udstyret med et væld af funktioner, som f.eks. RCA-input og -output, justerbart crossover-filter, gain-kontrol, basforstærkning og en fjernbetjening til justering af basniveauet. Den er både kraftfuld og pålidelig og vil uden tvivl imponere selv de mest kræsne lydentusiaster. Med Earthquake Sound's PowerHouse Shredder-serie får du den ydelse og kvalitet, du leder efter.
5.100,00 kr
-
Earthquake Earthquake PHS3500.1 Kraftfuld Bilstereo Forstærker 3500W RMS
PowerHouse Shredder 3500.1 Earthquake Sound præsenterer den helt nye PowerHouse Shredder-serie, som er designet til audioentusiaster, der er på jagt efter stor ydelse og kraftfuld bas. Serien indeholder tre forskellige modeller, der er udviklet til at håndtere de mest krævende højttalere. Disse fuldtone digitale, højstrøms monoblok-forstærkere er yderst effektive (99%) og har en frekvensrespons på 15Hz til 20kHz. Shredder-forstærkerne er bygget til at præstere og leverer massiv effekt uden at blive overophedet, selv under kontinuerlig og hård brug. De har et væld af funktioner, såsom RCA-input og -output, justerbart crossover-filter, gain-kontrol, basforstærkning og en fjernbetjening til justering af basniveauet. Shredder-forstærkerens specifikationer omfatter: Kanaler: 1 Klasse: Digital klasse D Effektudgang ved 1Ω: 3500 WRMS ved 1% THD Effektudgang ved 2Ω: 2000 WRMS ved 1% THD Effektudgang ved 4Ω: 1200 WRMS ved 1% THD Frekvensrespons: 15Hz-20kHz Højpasfilter: 15Hz-80Hz Lavpasfilter: 80Hz-20kHz Basforstærkningsområde: 35Hz-70Hz Basforstærkningsniveau: 0-12dB Signal-støjforhold: 90dB Effektivitet: 99% Gain Min/Max: 5V-0,2V Udgangsstøj: 16mV Uanset om du er en basshead eller bare ønsker en højtydende forstærker, er Earthquake Sound's PowerHouse Shredder-serie et godt valg.
3.300,00 kr
-
Earthquake VTEK-Xi 6x9" Højttalersæt til Hattehylden - 500W High-End Performance
Dette sæt 6x9" oplagt til montering i hattehylden og har en god performance til når det skal være sjovt- 25mm ASV VC Glass fiber cone High End Coaxial Long Excursion NOMEX/ROMEX spider assembly PistonMax™ Swiveling Silk Dome Tweeter Woofer Protection Circuitry The VTEK-Xi line of speakers are designed with an emphasis on OEM applications to install precision high quality aftermarket speakers in factory upgraded vehicles. The new VTEK-Xi speakers deliver the same quality and performance as the original VTEK speakers but are now available in a convenient 2-Ohm package. Eliminating the need to buy over-priced replacement speakers from the vehicle manufacturer or the audio manufacturer, Earthquake’s new VTEK-Xi speakers cost less, perform better, and will reach you in less time. With several features that enhance sound quality, performance, and protection, the VTEK-Xi speakers deliver the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, die-cast aluminum baskets for additional self cooling, PistonMax drive technology for higher sound quality plus quantity and 20mm swiveling silk dome tweeters result in the smoothest, highest, precision highs possible. Box dimensions 12 × 45 × 28 cm Weight 2.95 kg Specifikationer Frequency Response 40Hz-22kHz (±3dB) MAX Power 500W Midbass 127x178mm / 25mm voice coil Nominal Impedance 4 ohm Sensitivity 90dB @1W/1M Tweeter 20mm silk dome / neo magnet Produkt Dimensioner Cut out hole 183mm x 129mm Frame Diameter 219mm x 140mm Grille protrusion 22.606mm Grille Tray Outer Diameter 165 mm Magnet Width / Diameter 88 mm Mounting Depth 59 mm
680,00 kr
-
Earthquake Earthquake Sound Focus™ 6x9 Højttalersæt - Topkvalitet til Bilen
Dette sæt 6x9" oplagt til montering i hattehylden og har en god performance til når det skal være sjovt- Focus™ speakers are serious products, engineered by Earthquake Sound to meet the demands of the toughest musical and environmental situations in the high-fidelity world. Speakers are not about hype or the “One Of A Kind” material… it’s all about being able to thoroughly enjoy your music no matter what type it is. By applying our extensive testing and development resources, Focus™ speakers have been optimized to reproduce your music with lifelike balance, effortless dynamics and smooth response in the car. Special attention has been placed on high frequency response and piston area which might makes all the difference when installed in a vehicle. There are many other products out there, and quite a few more that are overpriced… So, don’t be sold on a name or a power rating…do your homework and listen to the details, because no other piece of equipment makes a bigger difference in a sound system than the component and coaxial speakers. Weight 5.65 kg Specifikationer Frequency Response 20Hz – 22kHz (±3dB) MAX Power 600W Midbass 229mm / 25.4mm voice coil Midrange/bass 50.8mm super dome Nominal Impedance 4 ohm Sensitivity 90dB @1W/1M Tweeter 20mm silk dome / neo magnet Produkt Dimensioner Height 114 mm Diameter 152mm x 229mm Cutout Diameter 152.4mm x 216mm Mounting Depth 86 mm
728,00 kr
-
Earthquake Earthquake Sound FC-5-2 Højttalersæt - 500W Max, 35Hz-22kHz
Focus™ speakers are serious products, engineered by Earthquake Sound to meet the demands of the toughest musical and environmental situations in the high-fidelity world. Speakers are not about hype or the “One Of A Kind” material… it’s all about being able to thoroughly enjoy your music no matter what type it is. By applying our extensive testing and development resources, Focus™ speakers have been optimized to reproduce your music with lifelike balance, effortless dynamics and smooth response in the car. Special attention has been placed on high frequency response and piston area which might makes all the difference when installed in a vehicle. Box dimensions 9 × 40 × 35 cm Weight 3.1 kg Specifikationer Frequency Response 35Hz – 22kHz (±3dB) MAX Power 500W Midbass 133mm / 30mm voice coil Nominal Impedance 4 ohm Sensitivity 87dB @ 1W/1M Tweeter 25mm silk dome / neo magnet
780,00 kr
-
Earthquake VTEK-57Xi 6x9" Højttalersæt - 500W, 2 Ohm, Silk Dome Tweeter
Dette sæt 6x9" oplagt til montering i hattehylden og har en god performance til når det skal være sjovt- Det er vigtigt at notere at dette er en 2 ohms højttaler og du sikre at se i manualen om den forstærker udgang du ønsker der skal trække den, kan håndtere de 2 ohms belastning. 25mm ASV VC Glass fiber cone High End Coaxial Long Excursion NOMEX/ROMEX spider assembly PistonMax™ Swiveling Silk Dome Tweeter Woofer Protection Circuitry The VTEK-Xi line of speakers are designed with an emphasis on OEM applications to install precision high quality aftermarket speakers in factory upgraded vehicles. The new VTEK-Xi speakers deliver the same quality and performance as the original VTEK speakers but are now available in a convenient 2-Ohm package. Eliminating the need to buy over-priced replacement speakers from the vehicle manufacturer or the audio manufacturer, Earthquake’s new VTEK-Xi speakers cost less, perform better, and will reach you in less time. With several features that enhance sound quality, performance, and protection, the VTEK-Xi speakers deliver the best OEM sound possible at the best price possible. Features such as glass fiber cone bodies for faster and more accurate dynamic responses, die-cast aluminum baskets for additional self cooling, PistonMax drive technology for higher sound quality plus quantity and 20mm swiveling silk dome tweeters result in the smoothest, highest, precision highs possible. Box dimensions 12 × 45 × 28 cm Weight 2.95 kg Specifikationer Frequency Response 40Hz-22kHz (±3dB) MAX Power 500W Midbass 127x178mm / 25mm voice coil Nominal Impedance 2 ohm Sensitivity 90dB @1W/1M Tweeter 20mm silk dome / neo magnet Produkt Dimensioner Cut out hole 183mm x 129mm Frame Diameter 219mm x 140mm Grille protrusion 22.606mm Grille Tray Outer Diameter 165 mm Magnet Width / Diameter 88 mm Mounting Depth 59 mm
649,00 kr
-
Earthquake VTEK-MC5 Højttalersæt: Klar Lyd & Kraftfuld Bas - Earthquake
You’ll be hypnotized by the vibrant imaging of VTEK component systems. Expect shining clear sound and blazing performance, thanks to Earthquake’s combination of innovative materials and design. The Layered Electroplated Carbon Fiber woofer cones produce accurate, natural-sounding bass, thanks to a linear drive magnet design and the excellent sound-propagating qualities of the woofers’ low mass cone.Bottom line, these are sound quality speakers designed to take the guessing game out of high-end speaker choices. Box dimensions 10 × 46 × 34 cm Weight 3.7 kg Specifikationer BL 3.706 TM Frequency Response 45Hz – 23kHz (±3dB) MAX Power 500W Midbass 133mm / 30mm voice coil Nominal Impedance 4 ohm Sensitivity 91dB @ 1W/1M Tweeter 25mm silk dome / neo magnet Produkt Dimensioner Cut out hole 120 mm Magnet Width / Diameter 86 mm Parameters Revc 3.0000 Ohm Sd 8.900 msqM Mmd 9.197mKg Krm 306.459uOhm Erm 0.899 Kxm 14.133mOhm Exm 0.542 Mms 9.680g Cms 155.978uM/N Vas 61.956mcuFt Fo 129.528 Hz Qts 0.909 Qes 1.721 Qms 1.928 SPLo 85.3dB No 0.214%
1.021,00 kr
-
Earthquake Earthquake SUBZERO-15 Baswoofer - Revolutioner lydkvalitet
Subzero -When only the best will do This latest iteration of Subzero is a tour de force of how advanced design and technology can come together to create superior sound quality. All aspects of the design have been perfected to the smallest detail, resulting in truly revolutionary woofer performance. Subzero is capable of an incredible 3" excursion (12" Subzero). With excursion of this magnitude, Subzero produces levels of bass unattainable by conventional woofers. The extreme excursion ability coupled with the unique suspension makes Subzero extremely transient proficient. Even a light touch on the cone, easily moves it several centimeters. This ease of movement combined with the ultra-powerful magnet system results in a spectacularly fast and precise response. Subzero is free of the mechanical and electrical constraints inherent to common woofers. Lava-fused Octo Helix voice coil Subzero is equipped with a unique voice coil of oversized proportions. All aspects of the voice coil design are optimized for maximum performance, durability and sound quality.In the creation of the Subzero voice coil, Earthquake scientists have boldly challenged the very genesis of the voice coil itself. Traditionally, a lot of effort goes into choosing the right voice coil former (the cylinder to which the coil is wound). The former must be light, have similar heat expansion properties to the voice coil and it must promote cooling. Constantly advancing the state of the art, Earthquake engineers theorized that the best solution must be to have no former at all. While this theory flies in the face of all conventional wisdom, our engineers pressed on. During this proof-of-concept phase, it was realized that the technology needed to do away with the former simply did not exist. Instead of abandoning the quest for formerless technology, the research was extended to include facilitating technologies. In place of the structural support provided by the former, a super strong ultra high temperature adhesive was needed. A new insulator for the coil wire was also needed as traditional lacquer insulator does not have sufficient bonding properties for it to fuse together at the required tensile strength. This challenge was constructive in its own right as the biggest threat to woofer survival is heat, if the essence of this new technology would bring forth a temperature resilient voice coil it would serve to improve all other aspects of woofer operation. The creation of the needed high temperature adhesive proved difficult and the next break would come as an unlikely discovery by our Chief engineer while on vacation in Hawaii. Taking a scenic tour of Hawaii, he was walking through an area with volcanic ash and realized that the ideal base substance for a high temperature adhesive would be a material with no combustible elements left. Volcanic ash fits this description perfectly as it has been exposed to extreme heat - it has been combusted to the point where further heat exposure will not change its molecular structure. The volcanic ash was taken to our German adhesive manufacturing partner and six months later we had our next generation temperature invariant super adhesive. Now we just needed an equally temperature resistant insulator. The only known insulator capable of withstanding this immense heat was anodizing. Anodizing however is problematic because it breaks off the host material if it is bent beyond a certain point. After much experimentation it was discovered that it is possible to prevent the anodizing from breaking off if the coil wire is heated to red hot temperature at the time of winding. Finally, the first former-less voice coil could be made. The audible qualities springing from this new lighter and stronger coil type is nothing less than remarkable. Signature technologies such as the Octo-Helix winding scheme has evolved for use in the new Subzero. The Octo-Helix design requires a very advanced production process. The Helix design is unique because it allows identical electromagnetic coupling and thermal signatures of two voice coils. In a conventional subwoofer with dual voice coils, they are wound one on top of the other, resulting in asymmetrical electromagnetic coupling and heat dissipation capability. The Helix structure is free of these limitations, since the two coils are wound synchronously in-phase. The Helix wound voice coil is characterized by several obvious advantages - perfect electromagnetic coupling, identical thermal signature, lower distortion, higher performance and durability. The voice coil is comprised of eight (octo) layers of edge wound oxygen-free copper wire. This special copper wire is of the flat-wire type. Flat-wire has a much greater surface area than conventional round wire and can thus dissipate considerably more heat it. Another advantage is the coil can be wound closer - increasing motor power. The coil assembly meets mil-std specifications for temperature resilience - specifications set by the U.S. Department of Defense for use in military equipment. This guarantees peak performance even during hard and continuous operation. TCT - Turbine Cooled Transducer Subzero is equipped with the patented TCT (Turbine Cooled Transducer) technology. TCT creates cooling airflow similar to a tornado around the voice coil. The tornado is created by air forced through cooling channels milled in a vortex structure. Traditional voice coil cooling is done by drilling out the pole piece and the woofer stroke then pushes air back and forth. This cooling scheme only has a linear increase as a function of woofer stroke. TCT is different. TCT creates an exponential increase in cooling capacity as a function of woofer stroke. This is achieved by harnessing the centrifugal forces in the mini tornado to increase surface area contact between the air and voice coil. TCT is so effective that the voice coil temperature is reduced 50% compared to the same woofer without TCT. This prevents heat derived compression and keeps the woofer at maximum efficiency.. The compression is a result of the increased electrical resistance of the voice coil - the higher the temperature, the higher the resistance. Since TCT's cooling capacity increases exponentially with excursion, heat is not allowed to build up. The harder you drive Subzero the more it cools itself. Poly-Ether draw SWE (Super Wide Edge) suspension For Subzero our unique SWE (Super Wide Edge) suspension design has been enhanced by the use of Poly-Ether draw material. Sporting an extreme curve height of 62 mm the stage has been set for incredible excursion. The manufacturing of this advanced suspension is a complex process spanning several stages. Poly-Ether draw is used primarily in military applications because of its high strength and flexibility. The sophisticated and costly processing requirements has so far limited its use outside the military. Thanks to the obsessive high-tech emphasis by Earthquake, the entire Poly-Ether draw manufacturing process can be done in-house. As part of the manufacturing process, the Poly-Ether material is thermally pressed and laminated giving it extreme strength and mobility. The suspension geometry is of the single-layer type and allows ultra long excursion without mechanical breakup. This results in woofer stroke potential in excess of 100 mm without deformation or increased mechanical resistance.This ensures perfect reproduction of even the most bass heavy soundtracks Parabolic deep dish woofer cone The Subzero cone is made of a proprietary non-pressed fiber reinforced cellulose pulp substance with extreme stiffness. The cone is then superimposed with a parabolic deep dish made of a strong space age polymer that obtains additional rigidity by its geometric shape. The cone does not flex or deform regardless of input power and frequency. Dual Super-Spider with composite center and symmetric stitched tinsel leads The Subzero spider is of the super spider type, which means the spider has the same diameter as the cone -this ensures the spider is not limiting excursion. The Subzero is equipped with a double super spider unit comprised of a Nomax /Romax hybrid material that has been epoxy coated for increased strength. The individual super spider units are arranged as identical opposites - canceling nonlinearities inherent to typical single or dual spider designs.The result is a clean sound - free from mechanical artifacts. For optimal performance the edge suspension and spider must have the same excursion potential, this is not possible with a traditional spider of limited diameter. Traditionally, the spider is glued to the voice coil, this results in heat transfer from the voice coil to the spider. This heat transfer effects the spiders compliance and can over time degrade the spider. The Subzero super spider is not glued the voice coil, but attached to a composite center ring that in turn is bonded to the voice coil. The special composite material is neither heat sensitive nor a thermal conductor. Thus the endurance and longevity of the Subzero is not affected regardless of drive level. The tinsel leads to the voice coil are sewn into the spider to ensure against collision with the cone during extreme excursion. This also extends the life of the tinsel leads, as they now bend more gently over a longer distance. The symmetrical design of the tinsel leads prevents an asymmetrical pull on the cone. The result is longer woofer life, and greater endurance. Double stacked Cobalt-Ceramic high gauss magnet system Subzero is built around a gigantic magnet system. It consists of two huge Cobalt-Ceramic magnets which have been hyper magnetised in-house by Earthquakes military grade Magnetiser. The two magnets have a total thickness of 6 cm, the top plate alone is 1 cm and the pole piece is 5 cm. With a total height of 12 cm - the voice coil is given unhindered travel space far beyond its mechanical limits. This ensures that not even the strongest transient may cause the device to run out of electromagnetic coupling. At the same time the high gap height contributes to voice coil cooling, as the immense mass of metal effectively absorbs heat. Diamond cut chassis with XLT geometry The Subzero is based on Earthquakes signature XLT chassis geometry. It is the optimal design for extreme excursion. The XLT chassis allows for extra length between the spider (center suspension) and the magnetic gap. It is designed to accommodate oversized spiders and voice coils. The Subzero chassis feature another advanced design detail unique to the Subzero. All other woofers have the chassis mounted on top of the magnet. The Subzero encases the magnet within the chassis and the chassis is mounted to the magnet from behind. This special design prevents the chassis from degrading the magnetic flux asserted on the voice coil. The oversized and rigid chassis is made of cast aluminum which is then diamond cut. This results in an ultra-rigid and robust chassis featuring stunning good looks. The chassis is further characterized by all components of the assembly being bolted together with stainless steel machine screws. This design is extremely rugged compared to ordinary assemblies where the chassis and magnet system is often glued and / or tabbed together. The technically superior design ensures exceptional durability, sound quality and pride of ownership. Pris er pr. stk. Box dimensions 53 × 53 × 35 cm Weight 23.6 kg Specifikationer BL 37.8262 T·M BL @ Xmech 70% MAX Power 2500W Nominal Impedance 4 ohm + 4 ohm RMS Power 1250W Sensitivity 89.7 dB Voice Coil Dual Woofer Size 15″ Voice Coil Voice Coil Diameter 3″ / 76.2 mm Produkt Dimensioner Cut out hole 369 mm Mounting Depth 240 mm Parameters Fmd 3.0000 KA Qmd 1.0000 Flp 8.0000 KA Qlp 2.0000 Znom 8.0000 Ohm Revc 7.8000 Ohm Sd 8.90000E-02 M² Mmd 3.541806E-01 Kg Rtvc 2.500000E-01 °C/W Xcoil 3.0000 In Xmax 3.17500E-02 M Krm 3.54970E-02 Ohm Erm 8.0000E-01 Kxm 2.091940E-01 H Exm 6.770000E-01 Rms 4.4866 N·S/M Mms 3.694390E-01 Kg Cms 1.146000E-04 M/N Vas 4.5787 Ft³ Fs 24 Hz Fo 24.4600 Hz Qts 0.3021 Qes 0.3095 Qms 12.6551 Levc 1.24090E-02 H SPLo 89.7098 dB No 5.877000E-01 % Others Mechanical Xmax 101.6mm peak to peak Electrical Xmax 50.8mm peak to peak
6.599,00 kr
-
Earthquake VTEK-693 Højttalersæt 6x9" - Kraftfuld Bas, 700W, Silke Diskant
Dette sæt 6x9" oplagt til montering i hattehylden har stort effekt overskud og bevare en god bas i forhold til dens størrelse. Støbt aluminiums chassis Glasfiber membran Lang slaglængde Silke diskant Box dimensions 11 × 49 × 23 cm Weight 6.35 kg Specifikationer Frequency Response 25Hz – 22kHz (±3dB) MAX Power 700W Midbass 152 x 229mm / 31.8mm voice coil Midrange/bass 50.8mm super dome Nominal Impedance 4 ohm Sensitivity 92dB @1W/1M Tweeter 20mm silk dome / neo magnet Produkt Dimensioner Cut out hole 218.03mm x 144mm Frame Diameter 235mm x 164mm Grille protrusion 36.068mm Magnet Width / Diameter 110 mm Mounting Depth 95.25mm
1.399,00 kr
-
Earthquake Earthquake MKVI DSP Forstærker -1000W RMS, DSP-Kontrol
After a long wait, Earthquake Sound Corporation has now released the most power Supernova amplifier ever made. The new MKVI DSP amplifier is a home theater monster capable of dumping 1000 WRMS into a 2 ohm load all day long without breaking a sweat thanks to its patented IQ technology allowing for 98% of GREEN power and a mere 2% of heat. Like the newer MiniMe DSP series of home theater subwoofers, the MKVI DSP has now been overhauled with a highly advanced DSP processor for unappalled control and sound quality. Users will achieve professional level tuning results from features like active room correction functions, 25 bands of equalization, continuous phase control, and up to 48dB/Octave crossover all available at your fingertips. Simply sliding your finger up or down on a mobile device instantly changes the slope or slide your finger sideways to adjust the bandwidth. As for room correction, the MKVI DSP amplifier is equipped with genuine room correction functions that take reflections, refractions, arrival, and equalization all into account making this amplifier a complete DSP solution that ensures optimum acoustic integration into any room. One major highlight of this DSP amplifier is the ability to regenerate bass that was removed during recording with the subharmonic synthesizer function. Simply slide your finger to enable it and SHS is activated on the fly. Furthermore, the MKVI DSP’s power supply is based on a stiff silicon-steel hard-wound low-emittance toroidal transformer that provides stable high power and no interference. For DIYers and existing Supernova owners, the new MKVI DSP amplifier is a direct drop-in replacement for the older MKVI subwoofers that were equipped with the IQ series plate amp. Simply remove the factory mounting screws and make the necessary wire connections and you have a new subwoofer with the latest Earthquake technology. With full user control and uncompromising performance, the all new Earthquake Sound MKVI DSP raises the bar of home theater amplifiers. DSP For Total Control – This plate amplifier can be used as an upgrade to an existing Supernova MKVI Subwoofer. Download manualen her Features: Advanced class D circuitry Fully balanced XLR input and output Low level RCA input and output 40Hz–160Hz variable low pass filter Continuously variable crossover with up to 48db/Oct slope Room correction with full DSP control Mono DSP output for sending processed signal to an additional subwoofer 3-way Auto/On/Off signal mode selector XLR/RCA input mode selector DSP On/Off selector Auto room tuning adjustments 0–180° phase adjustment selector IR remote and remote eye iWoofer™ Pro compatible DSP pairing via Bluetooth™ 110V/220V AC selector 1500W dynamic and over 1000W RMS at 2Ω Frequency Response: 18Hz–115Hz iWoofer Features: XOver Control (6, 12, 18, 24, 30, 36, 42, and 48dB/Octave) Gain Control SHS Control Delay Control Phase Control (Variable phase with 1 degree increment from 0–180°) Limiter-Compressor Base Control Limiter-Compressor Detailed Control* Dynamic Bass Base Control Dynamic Bass Detailed Control* Remote Hardware Control Preset Manager Preset Import/Export Features Automated Room Correction* SPLMeter*
7.295,00 kr
-
Earthquake Earthquake EQ-10-4 Basdriver 10" - Kompakt og Kraftfuld til Festival
Er du på udkig efter en kraftfuld og kompakt basdriver til din lydopsætning? Look no further end Earthquake EQ line of Maximum Musical Output drivers. Med et kabinet på kun 20 liter kan denne enkelt driver levere 112dB i gennemsnitlig lydtryk og peak op til 115dB. Det er muligt med et 68 x 220mm basrefleksrør,Designet er specifikt til at give en glat, lav-distortion mid-range/mid-bass output for den højeste kvalitet lydforstærkning. Earthquake EQ linjen er også unik, da de har en relativt høj resonans og meget lav Qts værdier, hvilket gør det muligt at montere dem i små kabinetter, mens man stadig opretholder en glat, peak-free respons.
550,00 kr
-
Earthquake Earthquake AWS-802W - Vejrbestandig Væghøjttaler for Alle Forhold
Earthquake AWS-802W udendørs væg højttaler Udendørs højtalere til ekstremt vejr - AWS højtalere kan tåle det andre ikke kan! Placering i direkte regn – intet problem Placering i direkte sol – intet problem Hård frost – intet problem Sandstorm – intet problem (Det amerikanske militær bruger dem i Irak og Afghanistan) Gentagne slag med baseball kølle og/eller påkørsel af gaffeltruck – intet problem Placering i reol eller montering på væg – intet problem AWS serien kan ved bestilling af stort antal leveres i US Military Desert eller Forrest camouflage finish. AWS serien muliggør placering af højtalere på steder hidtil ikke muligt. AWS garantere perfekt lyd og uovertruffen holdbarhed. AWS højtalere har aldrig brug for service eller vedligeholdelse. Prisen er per stk . Features All rust proof aluminum screws, brackets & grilles Extremely versatile molded PVC enclosure with UV protection Directional positioning for better sound dispersion Electroplated mylar woofer cones with UV protection Paintable to match any décor, indoor or outdoor High power handling Gold plated binding posts Excellent for all applications including marine Specifikationer: Model nr.: AWS-802W (White) Frequency Response: 55 - 20.000Hz Sensitivity: 96dB@1W/1M Nominal Impedance: 8-Ohm Power Recommendations: 60-200 Watts Woofer: 8 inch (203mm) 25mm ASV voice coil Tweeter: One 1” (29mm) PEI Mylar Dome Dimension millimeters: 367 x 273 x 206 Finish: White or Black paint able Dimensioner: AWS-802 Manual AWS-802 Cut Sheet AWS-802 Product Release
1.840,00 kr
-
Earthquake Earthquake SUB-6: Slank 6" Indbygnings-Subwoofer 300W - 8 Ohm
SUB-6 er en subwoofer fra Earthquake med kun 86mm dybde Denne subwoofer til indbygningslyd vedholde det samme udseende som en almindelig 6" indbygningshøjttaler som VQ6, ECS-6.5 eller SPE-62HQ Men kun 86mm i dybden giver den mulighed for at få noget dyb i loftet til trods for at pladsen er trang. Det er opnået ved at konstruktionen har selve motorsystemet bygget på forsiden af enden. Den har indbygget delefilter så den kan fødes med et fullrange forstærker signal, hvor et scenarie kunne være at forbinde på samme forstærker udgang sammen med en af de overstående højttalere og dermed ialt ha en 4 ohms belastning. Har du allerede 2 indbygnings højttalere på 8 ohm hver på en forstærker udgang er det højest sandsynligt for stor en belastning med at koble denne her til oven i dem da det vil give for lav impedans. Med ekstra lang slaglængde for den bevæget noget mere luft end en almindelig indbygningshøjttaler Det er en hjælp til bedre performance med en kasse bag den på ca 25 liter og der er en tegning i billederne. Til denne type enhed anbefaler vi en halv pakke MDM-2 dæmpeuld i kassen, og hvor det er trukket ud så det er løst som candyfloss.
1.240,00 kr
